| Product |
Uses |
Pack
Size |
Thickness |
Performance |
Pack
Yield (approx) |
Download |
|
1.
HAND-PLACED REPAIR MORTARS |
MONOMIX
EN1504-3 Class R3,
DWI
31, BBA, WRAS |
Low
density waterproof mortar for general purpose, structural
repairs. |
25kg |
5-80mm |
1
day 23.5N/mm²
7 days 41N/mm²
28 days 48N/mm² |
16.5
litres
60.5 packs per m³
Density:
1700-1750kg/m³ |
Technical
Data Sheet
Safety
Data Sheet
Application
Guide |
FASTFILL
EN1504-3
Class R4,
DWI 31, BBA, WRAS |
Rapid
setting repair mortar. Can be bulked out in deep
sections. |
25kg |
5-50mm
(vertical)
5-100mm (pockets) |
1
hour 10N/mm²
1 day 34.5N/mm²
28 days 66N/mm² |
13.3
litres
75 packs per m³
Density: 2150kg/m³ |
Technical
Data Sheet
Safety
Data Sheet
Application
Guide
Training Video |
| FASTFILL
WP |
Rapid
setting mortar for arresting water seepage and infiltration
under pressure. Sets in 2 mins. |
8kg |
20mm
(min.) |
1
hour 10N/mm²
1 day 34.5N/mm²
28 days 66N/mm² |
4.25
litres
235 packs per m³
Density: 2150kg/m³ |
Technical
Data Sheet
Safety
Data Sheet
Application
Guide |
TIEFILL
EN1504-3 Class R4,
WRAS |
Rapid
curing mortar for the filling of tie-holes formed by
formwork bolts. |
8kg
& 25kg |
5-50mm |
1
hour 8.5N/mm²
1 day 39.5N/mm²
28 days 59.5N/mm² |
4.1
litres per 8kg pack
12.9 litres per 25kg pack
Density: 2150kg/m³ |
Technical
Data Sheet
Safety
Data Sheet
Application
Guide |
|
2.
SPRAYABLE & POURABLE REPAIR MORTARS |
MONOMIX
WS
EN1504-3
Class R4, DWI
31, BBA, WRAS |
Modified
Monomix to allow wet spray application. Waterproof
and low density. |
25kg |
5-80mm |
1
day 25N/mm²
7 days 39N/mm²
28 days 45N/mm² |
16.25
litres
61.5 packs per m³
Density: 1750kg/m² |
Technical
Data Sheet
Safety
Data Sheet
Application
Guide |
|
3.
FAIRING COATS, RENDERS & POINTING MATERIALS |
MONOLEVEL
844SP
EN1504-3 Class R4,
DWI 31, WRAS |
Engineering
quality fairing coat to reinstate cover and provide
a fair faced, waterproof and anti-carbonation finish. |
25kg |
6mm
(max.) |
1
day 23N/mm²
7 days 46N/mm²
28 days 60N/mm² |
15
litres
66.5 packs per m³
Density:
1800-1900kg/m³ |
Technical
Data Sheet
Safety
Data Sheet
Application
Guide |
|
4.
ADMIXTURES |
POLYMER
ADMIXTURE 850
WRAS |
Admixture for cement mortars and floor t-oppings. |
5
litres &
25 litres |
50mm
(max.) |
See
data sheet |
See
data sheet |
Technical
Data Sheet
Safety
Data Sheet
Application
Guide |
|
5.
CEMENTITIOUS COATINGS |
CEMENTITIOUS
COATING 851
EN1504-2,
DWI 31, BBA, WRAS |
Structural
waterproofing. Protection from chloride ingress
and carbonation. Reinstatement of cover. |
30kg |
2
x 1mm |
1
day 10.5N/mm²
7 days 20.5N/mm²
28 days 32N/mm² |
16.67
litres per 30kg
8.33m²/30kg @ 2mm
Density: 1800kg/m³ |
Technical
Data Sheet
Safety
Data Sheet
Application
Guide |
| CEMPROTEC
E942
EN1504-2 |
Waterproofing and protection of concrete where enhanced
chemical resistance is needed. Stand alone
anti-corrosion coating for ferrous metal. |
15kg
& 30kg |
2
x 1mm |
1
day 5-10N/mm²
7 days 30-40N/mm²
28 days 50-60N/mm² |
8.1
litres per 15kg
4m²/15kg @ 2mm
16.2 litres per 30kg
8.1m²/30kg @ 2mm
Density: 1850kg/m³ |
Technical
Data Sheet
Safety
Data Sheet
Application
Guide (Concrete Substrates) Application
Guide (Steel Substrates)
Application Video
Training Video |
|
6.DECKING
& EXTERNAL FLOORING PRODUCTS |
CEMPROTEC
E-FLOOR
EN1504-2 |
Epoxy
and cement modified polymer coating for protecting/
waterproofing concrete floors. |
30kg |
2mm
(min.) |
4
hours 5N/mm²
1 day 13N/mm²
7 days 33.5N/mm²
28 days 56N/mm² |
16.2
litres
8.1m²/30kg @ 2mm
Density: 1850kg/m³ |
Technical
Data Sheet
Safety
Data Sheet
Application
Guide
Application Video
Training Video |
|
7.
CORROSION INHIBITORS |
|
CEMPROTEC
MCI® 2020 |
Surface
applied corrosion inhibitor for the protection of reinforcement
in chloride contaminated concrete. |
25
litres |
3.68m²/litre
(can be applied in two coats to give above coverage) |
N/A |
25
litres treats 92m²
3.68m²/litre |
Technical
Data Sheet
Safety
Data Sheet
Application
Guide |
|
8.
PRIMERS |
STEEL
REINFORCEMENT PROTECTOR 841
DWI
31, BBA |
Corrosion preventative flexible coating for steel reinforcement. |
5kg |
2
x 1mm (min.) |
32N/mm² |
2.8
litres
45 linear metres of 10mm bar.
Density: 1800kg/m³ |
Technical
Data Sheet
Safety
Data Sheet
Application
Guide |
|
9.
ANTI-CARBONATION COATINGS |
| BOND-PRIME |
Single component, water based, epoxy modified polymeric primer for membrane coating systems. |
5 litres & 25 litres |
Max.
coverage 10m²/litre |
N/A |
15-50m²/5
litres
75-250m²/25 litres |
Technical
Data Sheet
Safety
Data Sheet
Application
Guide |
| MONODEX SMOOTH |
High performance water based, elastomeric, high build, decorative coating which provides protection against carbonation and water ingress, yet allows damp substrates to breathe without blistering. It has a matt finish and is ultra-fast drying which enables two coat applications to take place on the same day and facilitates year round usage. |
15
litres |
WFT 1st
Coat 200µm
WFT 2nd Coat 200µm
Overall DFT= Nominal 200µm |
Water Vapour:
SD ≤4m
Carbon Dioxide:
Rco2 ≥50m
Elongation At Break: (BS903 PA2)
190% at 200µm DFT (Unreinforced)
27% at 1100µm DFT (Reinforced)
Serviceable life: 15+ Years
|
0.2litres/m²/
coat
5m²/litre/coat
15litres covers 37.5m² |
Technical
Data Sheet
Safety
Data Sheet Application
Guide
Colour
Guide |
| MONODEX ULTRA |
Water-based flexible decorative coating which provides protection against carbonation and water ingress without entrapping moisture within damp substrates. It has a matt finish and is available in a range of architecture-inspired colours. It resists the growth of mould and fungi, making it an ideal low maintenance coating for internal and external use. |
15
litres |
WFT 1st
Coat 200µm
WFT 2nd Coat 200µm
Overall DFT= Nominal 130µm |
Water Vapour Transmission:
20g/m²/day
µCO2 =1,530,000
Rco2 ≥50m
Elongation At Break: (BS903 PA2)
125% at 130µm DFT (Unreinforced)
Serviceable life: 10+ Years
|
0.2litres/m²/
coat
5m²/litre/coat
15litres covers 37.5m² |
Technical
Data Sheet
Safety
Data Sheet Application
Guide
Colour
Guide |
| 10.
ANCILLARIES |
| BIODEX WASH |
Powerful surface treatment for neutralising active mould, fungal and bacterial growth prior to the application of products in the Flexcrete range. |
5
litres |
N/A
|
N/A
|
Up to 10m²/litre
50m² per 5 litre pack
|
Technical
Data Sheet
Safety
Data Sheet
Application Guide
|
The
table below highlights the Flexcrete products that have
been independently approved by professional bodies. The
Drinking Water Inspectorate (DWI) regulates public water
supplies; the products indicated are listed as approved
under Regulation 25(1)(a) for use in contact with the supply
of water for drinking, as published by the UK Secretary
of State. The Water Regulations Advisory Scheme (WRAS) grants
approval for materials that comply with UK water regulations.
