Monomix- Low density waterproof mortar for structural REPAIRS
(EN1504-3 Class R3, DWI 31, BBA, WRAS)

Flexcrete's Monomix is a low density, high strength, shrinkage compensated mortar for the structural repair, rendering and profiling of vertical, horizontal and overhead surfaces.

Monomix is a single component cementitious mortar which incorporates the most advanced cement chemistry, microsilica, fibre and styrene acrylic copolymer technology. This results in a rapid hardening, low density, high strength mortar with enhanced polymer properties. The thixotropic nature of the product enables easy high build trowel application for the structural repair of voids and the rendering and reprofiling of vertical, horizontal and overhead surfaces. The product is supplied as a single component system ready for on-site mixing and use, requiring only the addition of clean water.

Advantages of Monomix

Innovative: Incorporates the latest proven cement chemistry, microsilica, fibre and styrene acrylic copolymer technology.
Ease of use: Materials are pre-packaged and only require mixing with clean water on-site to give an easily trowellable mortar with maximum application thickness of 80mm in vertical, horizontal and overhead situations.
Shrinkage compensated: Enables high bond strength, superior to tensile strength of concrete, to be maintained and ensures monolithic performance of the repair.
Low permeability: Dense matrix provides excellent protection from the ingress of acid gases, moisture and chlorides.
Fibre reinforced: Improved tensile and impact strength. Excellent low sag properties.
Compliance: Fully complies with the Highways Agency Standard BD 27/86 for the repair of Highway Structures. Approved by the BBA Certificate No. 05/4276.
Safe: Non-toxic when cured and is listed as authorised under Regulations 31 for use in the supply of water for drinking.
Cost effective: Economical, low density, polymer modified, fibre reinforced cementitious mortar requiring no inter-layer priming. Part bags can be mixed.
Overcoating: Easily overcoated with specialist membranes to provide further protection and aesthetic quality.

Monomix Product Summary

Product
Uses
Pack Size
Thickness
Performance
Pack Yield (approx)
MONOMIX
EN1504-3 Class R3,
DWI 31, BBA, WRAS
Low density waterproof mortar for general purpose, structural repairs.
25kg
5-80mm
1 day 23.5N/mm²
7 days 41N/mm²
28 days 48N/mm²
16.5 litres
60.5 packs per m³
Density:
1700-1750kg/m³

For more detailed product information download:

Monomix Technical Data Sheet
Monomix Safety Data Sheet
Monomix Application Guide