Monolite - lightweight mortar for cosmetic repairs
(EN1504-3 Class R2)

Flexcrete's Monolite is a low density, high build, shrinkage compensated, polymer modified mortar for the repair, rendering and profiling of concrete, brick or stone substrates.

Monolite is a single component, cementitious mortar, which incorporates the most advanced cement chemistry microsilica, fibre and styrene acrylic copolymer technology. This results in a rapid hardening, low density mortar, with enhanced polymer properties. Its thixotropic nature enables easy high build trowel application for the repair of voids and the rendering and reprofiling of both vertical and horizontal surfaces. The product is supplied as a single component system, ready for on-site mixing and use, requiring only the addition of clean water.

Advantages of Monolite

Innovative: Incorporates the latest proven cement chemistry, microsilica, fibre and styrene acrylic copolymer technology.
Ease of use: Materials are pre-packaged and only require mixing with clean water on-site to give an easily trowellable mortar with a maximum single application thickness of 100mm in vertical, horizontal and overhead situations.
Shrinkage compensated: Enables high bond strength (superior to the tensile strength of concrete) to be maintained and ensures monolithic performance of the repair.
Low density: Ideal for application where additional dead load must be kept to a minimum.
Compliance: Fully complies with the Highways Agency Standard BD 27/86 for the repair of Highway Structures.
Cost effective: Economical, low density polymer modified, cementitious mortar, requiring no inter-layer priming. Part bags can be mixed.
Overcoating: Easily overcoated with specialist membranes to provide further protection and aesthetic quality.

Monolite Product Summary

For more detailed product information download:

Monolite Technical Data Sheet
Monolite Safety Data Sheet
Monolite Application Guide