Marine Mortar - General purpose structural repairs in marine and tidal areas
(BBA)

Marine Mortar S (up to 50mm) & Marine Mortar HD (up to 100mm)

Flexcrete's Marine Mortar was developed for the repair and profiling of vertical, horizontal and overhead surfaces in marine and tidal areas which are subject to early immersion.

Marine Mortar is a multi-component, thixotropic, fibre reinforced, polymer modified, cementitious mortar with excellent cohesion for use in areas subject to early immersion. It cures rapidly to produce a high strength mortar with enhanced polymeric properties for the repair of voids in aggressive marine environments. The product is supplied as a two component system in pre-weighed quantities ready for on-site mixing and use, requiring no extra additions of water or aggregate. The S grade is suitable for application thicknesses up to 50mm whilst the HD contains a 10mm granite aggregate which is bagged separately to avoid segregation and can be used up to 100mm.

Advantages of Marine Mortar

Simple: Materials are pre-packaged for simple mixing on-site. Two grades are available dependent upon size of repairs.
Compatibility: Physical properties of cured materials similar to base concrete.
Thixotropic: Allows easy trowel application whilst enabling high application thicknesses in both vertical and horizontal situations.
Low shrinkage: Maintains high bond strength to substrate and ensures monolithic performance.
Fibre reinforced: Improved tensile and impact strength. Excellent low sag properties.
Resistant: Dense matrix provides excellent protection against the ingress of acid gases, moisture and chlorides. Excellent anti-wash out resistance.
Bond strength: Superior to tensile strength of concrete.
Compliance: Fully complies with the Highways Agency Standard BD 27/86 for the repair of Highway Structures. Approved by the BBA, Certificate No. 05/4276.
Cost effective: Economical polymer modified fibre reinforced cementitious mortar.
Safe: Non-toxic when cured.

Marine Mortar HD & Marine Mortar S Product Summary

Product Uses Pack Size Thickness Performance Pack Yield (approx)
MARINE MORTAR HD
BBA
Large structural repairs in marine and tidal areas.  Early wash-out resistance. 30kg 20-100mm 1 day 15-20N/mm²
28 days 50-60N/mm²
14.3 litres
70 packs per m³
Density: 2100kg/m³
MARINE MORTAR S
BBA
General purpose structural repairs in marine and tidal areas.  Early wash-out resistance. 30kg 5-50mm 1 day 15-20N/mm²
28 days 50-60N/mm²
14.3 litres
70 packs per m³
Density: 2100kg/m³

For more detailed product information download:

Marine Mortar S

Marine Mortar S Technical Data Sheet
Marine Mortar S Safety Data Sheet
Marine Mortar S Application Guide

Marine Mortar HD

Marine Mortar HD Technical Data Sheet
Marine Mortar HD Safety Data Sheet
Marine Mortar HD Application Guide