Unimatch - rapid setting mortar for structural repairs to in-situ and pre-cast concrete

Flexcrete's Unimatch is used for rapid structural repairs to in-situ and pre-cast concrete. It is especially suitable for repairs which need to be matched to the parent concrete to provide a high aesthetic finish.

Unimatch is a single component, structural grade repair mortar, based on the latest polymer cement technology, which is suitable for the repair of damaged, honeycombed or spalled concrete. It is highly waterproof and exhibits good build characteristics. It can be used in vertical, overhead and other difficult areas of repair without the use of primers, special lightweight aggregates or support.
Colour and texture match is easily achieved by mixing grades of Grey and White at different ratios using trial mixes. If necessary, coloured aggregates can also be blended in as well as concrete pigments.

Advantages of Unimatch

USER FRIENDLY: Materials are pre-packaged and only require mixing with clean water on site. No special primers are necessary.
COLOUR MATCHING: Supplied in Grey and White grades which can be blended easily for perfect colour match. Coloured aggregates can also be blended in as well as concrete pigments if necessary.
COMPATIBLE: Physical properties of cured materials similar to base concrete.
LOW SHRINKAGE: Maintains high bond strength to substrate and ensures monolithic performance of the repair.
POLYMER MODIFIED: Ensures enhanced adhesion and low permeability, giving excellent protection from acid gases, moisture ingress and chlorides.
RAPID SETTING: Rapid strength development - over 9N/mm² in 2 hours.
SAFE: Very low alkali content ensures low hazard in use and negligible risk of alkali silica reactions. Chloride free.
COMPLIANCE: Complies with Clause 6 of the DTp Standard BD 27/86.

For more detailed product information download:

Unimatch Technical Data Sheet
Unimatch Safety Data Sheet
Unimatch Application Guide