Monopour - shrinkage
compensated, waterproof, polymer modified, flowing grout
Flexcrete's Monopour is a high
performance, polymer modified, non-shrink, cementitious formulation
supplied in two grades. Monopour PG is a flowing grout and Monopour
PC6 is a micro concrete. Both grades can be pumped, poured or trowelled for large areas of concrete repair and heavy duty
applications beneath base plates, plinths and stanchion bases.
Monopour PG
is a grout with a maximum aggregate size of 2.5mm for application
thicknesses up to 100mm.
Monopour PC6 is a micro concrete with a maximum aggregate
size of 6mm for larger depths in excess of 50mm.
Monopour formulations incorporate the most advanced cement
chemistry, microsilica, shrinkage compensating and styrene acrylic
copolymer technology. This results in a rapid hardening, high
strength, non-shrink material with enhanced polymeric properties.
The product is supplied as a one component system for on-site mixing
with clean water to give the required consistency for application by
pumping, pouring or trowelling. The aggregate shape and grading have
been specially chosen to facilitate mixing and to maximise flow and
minimise the risk of segregation and bleeding. The product is
supplied in two grades containing different aggregate gradings.
Advantages of Monopour
INNOVATIVE:
Incorporates the latest proven cement chemistry, microsilica and
styrene acrylic copolymer technology.
EASE OF USE: Materials are pre-packaged and only require
mixing on site with clean water to give the required consistency for
pouring, pumping or trowelling.
NON-SHRINK: Dual expansion mechanism compensates for
shrinkage in the plastic and hardened state.
HIGH STRENGTH: Ultra-fine Portland cement cures rapidly to
give high early and long term strength development, enabling quick
reinstatement.
LOW PERMEABILITY: Dense matrix provides excellent protection from
the ingress of acid gases, moisture and chlorides.
PROVEN TECHNOLOGY: The gaseous expansion mechanism is
non-metallic and relies upon nitrogen gas formation which eliminates
the risk of staining and degradation resulting from corrosion. All
admixtures used are chloride free.
COMPLIANCE: Fully complies with the Highway Agency Standard
Part 4 BD 27/86 for the repair of Highway Structures. The alkali
content is controlled to less than 3kg/m³ and non-reactive
aggregates are used.
OVERCOATING: Easily overcoated with specialist membranes to
provide further protection and aesthetic quality.
For more
detailed product information download:
Monopour PG
Monopour PG Technical
Data Sheet
Monopour PG Safety
Data Sheet
Monopour PG Application
Guide
Monopour PC6
Monopour PC6 Technical
Data Sheet
Monopour PC6 Safety
Data Sheet
Monopour PC6 Application
Guide |
