Monolevel FC - fairing coat for filling minor blow holes and defects

Monolevel FC is an engineering quality fairing coat for filling minor blow holes and defects, and for repairing surface imperfections. Thin screed applications can be used to level both vertical and horizontal concrete surfaces to provide a fair faced finish.

Monolevel FC is a single component, thixotropic, polymer modified, cementitious mortar with high adhesive properties, allowing it to be used as a thin screed, as well as a filler, for filling minor voids and defects to provide a fair faced finish. It incorporates the most advanced microsilica, fibre and polymer technology, curing to provide enhanced freeze/thaw resistance and protection from the ingress of water, acid gases and chlorides. The product is supplied as a single component system, ready for on-site mixing and use, requiring only the addition of clean water.

Advantages of Monolevel FC

Innovative: Incorporates the latest proven cement chemistry, microsilica, fibre and styrene acrylic copolymer technology.
Ease of use: Materials are pre-packaged and only require mixing with clean water on-site to give an adhesive mortar which can be rapidly applied in vertical and horizontal situations by brush or trowel or spray techniques.
Shrinkage compensated: Maintains high bond strength superior to tensile strength of concrete, thus ensuring monolithic performance.
Safe: Non-toxic when cured.
Low permeability: Dense microsilica modified matrix enhances resistance to acid gases, moisture and chlorides.
Compliant: Cements used are quality assured, complying with BS 12.
Cost effective: Economical low density, polymer modified cementitious mortar requiring no priming. Part bags can be mixed.

For more detailed product information download:

Monolevel FC Technical Data Sheet
Monolevel FC Safety Data Sheet
Monolevel FC Application Guide